Kino Flo’s award winning 2ft 1 Bank portable lighting system is reintroduced with a new design. With new universal voltage from 100VAC to 240VAC, the 4Bank can be used anywhere in the world. The 4Bank is brighter than a 1,000W softlight, yet draws only 2.6A (120VAC), 50% less than the previous model. New features include new graphics, new color coded connectors and new power switches. The lighter weight 4Bank ballast has the same classic features: individual light control, HO/Standard switching and the same high quality standards: flicker-free, instant-on, dead quiet operation. Color temperature doesn’t shift when light levels change. With its new and classic features, the popular 4Bank remains to be a favorite tool among lighting professionals in the studio or on location.
The 4-Lamp Fixture
• Built-in Barndoors
• Removable Lamp Harness, Reflector and Louver
• Twist-on, locking Center Mount
• True Match® daylight and tungsten lamps
The High Output Ballast • 4Bank
• Universal input 100VAC-240VAC
• HO/Standard switching
• Individual lamp control
• Flicker-free, remote operation
• Instant-on, dead quiet
4Bank System Highlights
• 4-Lamp remote fixture w/ built-in barndoors
• Fixture includes removable Lamp Harness, Reflector and Louver
• Same fixture takes daylight and tungsten lamps
• Mounts to stand, light enough to be hand-held or taped to a wall
• Removable center mount
• High output, flicker-free ballasts
• Universal input voltage from 100-240VAC can be used anywhere in the world
• Instant-on, dead quiet
• Individual lamp switching – no color shift
• HO/Std switching
• Low amperage draw at 2.6A/120VAC
• Same ballast runs 4ft and 2ft lamps
• Operates at 1/3 the power of conventional tungsten softlights
• High color rendering (CRI 95) True Match® lamps in 3200K and 5500K
• UL listed, CE approved
Dimensions 35.5 x 13 x 22” (90 x 33 x 56cm) Weight 56.5 lb (26kg)
28.5 x 7.5 x 20”
(72.5 x 19 x 51cm)Weight
20 lb (9kg)
The 4Bank System was designed as a softlight source that could be plugged into the wall on location. With its narrow profile and size,
the 4Bank could approximate the quality of light from bounced sources without losing set space.
The first thing to note about the 4Bank System is that it consists of four components: 4Bank Fixture (fig. 1), Mounting Plate (fig. 2),
Ballast (fig. 3) and Extension Cable (fig. 4). It was designed in this manner to allow the greatest flexibility when working on film production
where the gaffer and DP are constantly being challenged to light unique locations and problem solve at a moment’s notice.
From lighting close-ups in a restaurant location to lighting large blue and green screens, the 4ft 4Bank is the most versatile product in the Kino Flo product range and was the first product developed by Kino Flo more than 25 years ago.
The 4Bank Fixture
The 4Bank Fixture houses the lamps and is comprised of a removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners. There is a strain relief on the Lamp Harness to ensure the connectors don’t pull off the lamps during operation. To get the harness away from the fixture, turn the ¼ turn fastener and rotate counter-clockwise to release.
The Harness wiring is color-coded. The same color-code must match at each end of the lamp for proper operation.
Fixture can be used in several configurations:
1) Complete fixture with all components combined.
2) “Harness Only” – The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into
tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated
independently of the fixture.
3) “Harness + Reflector” – Same as above, but may want to use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area, such as lighting blue and
green screens etc.
The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using
Kino Flo KF32 lamps.
Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or
independently with only the wiring harness. Additionally, on a production set the lamps are often changed out. The safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.
Besides the plastic louvers, other light control options include 4Bank Flozier available in full or half f-stop and the new BatWing Louver.
The Flozier attaches to the barndoors and can be adjusted to various configurations. The BatWing Louver attaches directly to the lamps
and gives direction to the light with minimal light loss.
4Bank Flozier 4Bank BatWing
One of the design features that makes the fixture so popular is the twist-on removable Center Mount. When it’s on, the fixture mounts easily to a light stand; when it’s off, the fixture is flat and can be hand-held, or hidden in a space too small to place a stand-mounting fixture. When the mount is removed, the grommet holes along the edge of the fixture are designed to allow the fixture to be screwed
to a wall or ceiling through its eyelets.
The standard mount comes with a 3/8″ lollipop that clamps into a grip head. The ball and socket mount allows the fixture to be oriented in a broad range of angles. There is also a longer baby-stand mount and a short version (see below). The yellow wire loops are there to provide attachment points for a safety chain.
4Bank mounting options include MTP-KW41 Mount with 3/8″ Pin (10mm); MTP-BW41 Mount with Baby Receiver Curve (16mm);
MTP-BW41S Mount with Baby Short (16mm).
Note: The lollipops on all of these mounts are interchangeable.
MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)
MTP-LBC Kino 41 Lollipop w/ Baby Receiver Curve (16mm)
MTP-LBS Kino 41 Lollipop w/ Baby Receiver Short (16mm)
Turn the knob to loosen or tighten the mount.
A Ballast Baby Mount (MTP-BAL1) is available as an accessory.The MTP-BAL1 can be used with a Mafer clamp to mount the ballast onto a stand, for example.
The 4Bank Ballast
4Bank Ballast – Model BAL-427
All the features of the 4Bank fixture would be useless if Kino Flo had not developed its own ballasts that could run the fixture heads remotely. Unlike conventional architectural ballasts that need to operate three feet to six feet from the fixture head, Kino Flo ballasts can operate the fixture heads from up to 75 feet (3 x 25ft extension cables).
The Kino Flo 4Bank is a high output, high frequency electronic ballast with universal input voltage from 100-240VAC, that can operate
four lamps (4ft or 2ft) up to 75 feet between ballast and fixture. The ballast sends a high output current to the lamps to drive the light as brightly as possible. Its high frequency electronics prevent any type of flicker as well. Custom electronic engineering ensures stable operation without magnetic hum or cooling fans to interfere with the sound recording on set.
4Bank Ballast (Model BAL-427 Controls View)
There is no delay when switching lamps. The ballast operates the lights on/off instantly. There is also a special Select switch to raise or drop the wattage in the tubes for light output and color control. Keeping the ballast remote from the fixture and lamps makes the controls more accessible to lighting crews who might need to rig the fixtures into set designs or high up in a lighting grid, but switch them easily from a convenient location on the stage floor.
Notice we haven’t used the word “dimming” to describe lighting control. The reason is that dimming changes a lamp’s color temperature and color balance. The 4Bank ballast has individual switches so that each lamp can be turned on/off. Additionally, the lamps can be operated in a high output/standard output mode. This combination controls light levels without the color shift issues you have with dimming.
The Kino Flo 4Bank ballast accomplishes all this and still out-performs tungsten lighting instruments when it comes to energy efficiency.
In other words, the ballast uses 1/3 the power to produce the same amount of soft light as incandescents. The 4Bank ballasts draw only
2.6A at 120VAC and 1.4A at 230VAC. The ballast works reliably under most normal conditions, but it’s also trustworthy in more harsh conditions, such as extreme cold. The ballasts are designed to operate at temperatures from 14F to 122F
(-10C to +50C).
In extremely cold temperatures, the ballast may not strike the lamp(s) initially because the lamp may need to warm up. Switch the ballast
to Off, wait seven seconds and try again. If the ballast does not strike after two or three attempts, turn off the ballast, check that the extension and harness connections are secure and re-strike. Once operating for a few minutes, the lamps should re-strike instantly.
The 4Bank Extension cable
Up to 75 feet (3 x 25ft) of extension cable can be used between the fixture and the ballast.
The Kino Flo Lamps
4Bank products require safety-coated lamps.
So, if the 4Bank ballast is the brains, then the lamps would have to be the beauty of the 4Bank System. The vaunted T-12 tube offers a large surface area of soft light. The wide design creates a nearly shadowless display that drops off evenly.
Smaller source fluorescents, such as the compact 55Watt lamps used in the Kino Flo Diva-Lites , can be brighter, but they are a bit
hotter and create denser shadows as well. Kino Flo compensates for the lower light level associated with T-12 tubes by overdriving each one with the ballast as described above. A discussion of the various lamps available for use in the 4Bank System in the lamp section provides more information on the types of lamps available from Kino Flo. It’s important to know that the True Match daylight and tungsten 4ft tubes and 2ft tubes common on sets around the world are unique to Kino Flo because they display broad, even, color-correct light that cinematographers have come to depend on. These are the only high color rendering fluorescent lamps made for the professional film and video production.
The 4Bank System will operate any 4ft and 2ft T-12 tube but the color will not be true and the life span will be shorter. All True Match lamps used in the 4Bank fixture are available safety-coated. Safety-coating protects the user from broken glass if the tube breaks. The lamps can operate independent of the fixture allowing them to be built into sets or custom soft boxes or hand-held.
The 4ft 4Bank produces more lumens than a 1000W tungsten softlight, yet uses only 2.6A (120VAC). This is especially important
when shooting on location or in a TV studio and power availability is an issue. The low power draw is also an advantage when operating on battery inverter power sources.
The 4Bank fixture’s lightweight, modular design includes built-in barndoors, removable lamp harness, louver and reflector. The fixture can be used complete with all components combined. The wiring harness can be removed so that the user can build a softbox behind Plexiglass in tight locations. The removable reflector can be used with the harness to give more punch to the light. The Louver can give direction to the light or be removed to give broad coverage over an area, such as lighting blue and green screens, etc. The twist-on removable center mount can mount the fixture easily to a stand. When the mount is removed, the fixture is flat and can be hand-held or hidden in a place too small to place a stand-mounting fixture. When the mount is removed, the fixture can be screwed to the wall or ceiling through its eyelets.
High Output, High Frequency Ballast
The 4Bank ballast features individual lamp control, HO/Standard switching and universal input voltage from 100VAC-240VAC which allows the ballast to be used anywhere in the world. It runs high output at a high frequency and operates four lamps (4ft or 2ft) up to 75 feet between ballast and fixture. Its high frequency electronics drive the light as brightly as possible while preventing any type of flicker as well. With custom engineering, the ballast operates instant-on and dead quiet. Together with the modular fixture, the portability and versatility of the 4Bank system with universal input voltage, makes it the perfect tool for lighting in the studio or on location.
Long Lamp Life
Lamp life of a fluorescent for the television and motion picture industry is determined more by its lumen maintenance than by its actual burn time. All fluorescent lamps display a lumen depreciation curve. This means that over time the light output gradually drops and lowers in color temperature.
True Match® Color-Correct Lamps
True Match® lamps are formulated to correspond to the spectral distribution curves of film and video cameras as well as look correct to the eye. They are designed to match the colors from quartz units or daylight sources such as HMIs. This gives the camera operator the option of mixing quartz hard light sources with fluorescent soft sources. Most lighting designers want the ability to use both qualities of light to enhance the set.
Architectural lamps are designed to optimize government-mandated standards for lumens per watt efficiencies (energy savings targets).
In order to achieve these standards, the lamps contain high levels of light in the green spectrum, which our eyes don’t perceive as inaccurate. Film and television cameras do record this added green. For example, green renders Caucasian skin tone as grayish and unattractive. The architectural lamps do not match with other studio lamps. They render colors inaccurately and make correction in post almost impossible.
In 1995 Kino Flo received a technical achievement award from the Academy of Motion Picture Arts and Sciences for the development of the first color-correct lamps for film. Kino Flo continues to be a leader in their field introducing new developments and constantly improving the efficiencies and formulations of its lamp technology.
Cost savings attributed to fluorescents cover a broad range of concerns:
Lower energy costs
Less heat so lower air conditioning expenses
No gel replacements because of low heat
Fewer lamp replacements due to longer lamp life
Lamp replacement labor reduced by a factor of 10
Fixture Part Number Lamps Lamp Type Dimensions Weight w/Lamps
4ft 4Bank CFX-484 4 F75 / T12 52 x 13 x 3.5" w/6.5" barndoors
(132 x 33 x 9cm w/16.5cm barndoors) 11.5 lb
2ft 4Bank CFX-244 4 F40 / T12 27 x 13 x 3.5" w/6.5" barndoors
(69 x 33 x 9cm w/16.5cm barndoors) 7.5 lb
Ballast Part Number Input
Frequency Amperage Lamp
Switching Dimensions Weight
4Bank BAL-427-120U 100~240VAC
50/60Hz 25kHz F75/2.6A, F40/2.5A
F30/1.6A, F20/0.9A 1~4 4ft/2ft 13 x 9.5 x 3"
(33 x 24 x 7.6cm) 4.9 lb
50/60Hz 25kHz F75/1.4A, F40/1.3A
F30/0.8A, F20/0.7A 1~4 4ft/2ft 13 x 9.5 x 3"
(33 x 24 x 7.6cm) 4.9 lb
There are no reviews yet.