[email protected] 02031500840
PHANTOM VEO4K-PL 4K SUPER SLOW MOTION CAMERA (HIGH SPEED)
£950.00 | Book for 7 days for the price of 3
- 4K at up to 1000 fps
- At 2K (2048 x 1080) up to 977 fps
- Super 35mm sensor
- Global shutter, switchable to Rolling shutter
- Color ISO 320T (Rolling shutter); 640T (Global shutter)*
- Recommended EI range is 800-1000
- PL or EF mount – note if using EF lenses, then check compatibility with the additional information page chart.
- 72GB RAM standard (5.6 seconds at 4K)
- on board RAM partition capability. This allows simultaneous:
- view playback,
- transfer media to CFAST
- and at the same time also capture on a loop recording.
- CFast 2.0 media compatibility for on board data transfer
- 10Gb Ethernet option for optimal workflow to external laptop
- Includes all VEO-S features: with on-camera controls, HDMI, 3G-SDI, secondary battery input
- Optional wired/wireless remote available for full remote operation.
Day based pricing : PHANTOM VEO4K-PL 4K SUPER SLOW MOTION CAMERA (HIGH SPEED)
Until now, The Phantom Flex was the only camera capable of 4K super slow motion capture, however, the Phantom VEO4K achieves this in a much more versatile format, since it is both lightweight enough for shoulder-mounted use (fully stripped-down, the body weight is just 2.5kg) and has a form factor smaller than a RED EPIC. Most importantly, compared with the very hungry 120W Phantom Flex, the VEO 4K only draws a frugal 80W of power consumption. Lower power demand means less batteries, making travel easier and the smaller, lighter size also means that you can mount the camera on a gimbal, crane or jib without issue.
Note that Phantom Introductory video and 2 x instructional videos are uploaded to the video tab.
The camera includes a global shutter too and optical low pass filter plus 72GB of on-board RAM and on board CFAST 2 data transfer capability too, to make it perform with the same image performance as a Phantom Flex4K-GS but with the convenient form factor of a Phantom VEO.
You can also partition the on-board memory to enable you to simultaneously view playback, transfer media and at the same time also capture on a loop recording, at the same time.
4K at up to 1000 fps
At 2K (2048 x 1080) up to 977 fps
Super 35mm sensor
Global shutter, switchable to Rolling shutter
Color ISO 320T (Rolling shutter); 640T (Global shutter)*
Recommended EI range is 800-1000
PL or EF mount – note if using EF lenses, then check compatibility with the additional information page chart.
72GB RAM standard (5.6 seconds at 4K)
on board RAM partition capability. This allows simultaneous:
transfer media to CFAST
and at the same time also capture on a loop recording.
CFast 2.0 media compatibility for on board data transfer
10Gb Ethernet option for optimal workflow to external laptop
Includes all VEO-S features: with on-camera controls, HDMI, 3G-SDI, secondary battery input
Optional wired/wireless remote available for full remote operation.
At its full 4096 x 2304 resolution the VEO4K-PL is capable of capturing up to 938 frames per second (fps), 1000 fps at 4096x 2160 or 977 fps at 2K (2048 x 1080). A reduction of vertical resolution will further increase the speed. The sensor can operate in global shutter (standard) or rolling shutter mode for increased dynamic range and to eliminate the need for black references.
With the maximum RAM configuration of 72 GB, at 1000 fps the VEO4K-990 will allow 5.6 seconds of record time of 4K capture. This will create 224 seconds of 25p playback (or almost 4 mins in 25p!) in full 4K resolution.
VMI supply 3 x 256GB CFAST cards for a generous provision of off-load capacity and high speed CFAST reader.
VMI’s VEO camera is supplied with 10Gb Ethernet for an optimal workflow, and it includes 3G HD-SDI, HDMI outputs and Programmable I/O.
VEO cameras are known for being built tough enough to perform in difficult environments, and are rated to withstand up to 30G as configured or up to 100G without the internal mechanical shutter option (which is standard on all models). The internal components are completely isolated which protects the electronics for long-term reliability.
VMI’s Phantom VEO 4K is available to hire with either PL or EF mount to be compatible with a wide range of industry standard lenses. 35mm (PL, Canon EOS or Nikon F/2.3? B4 with adapter). Clearly, the best option would be for the fastest lenses.
Optional Wireless Trigger and Remote Control Option
VMI can supply the VEO 4K with the Able Cine Cameo PCU2+ wireless control unit, so that all functions can be operated at a distance, permitting the camera to be placed in a hide or on a jib/crane or other distance operation mode. This allows wireless control of up to 2 Phantom cameras simultaneously and can work in wireless or wired modes. It allows remote control of the phantom camera operations without a laptop, controls the capture process and allows playback mode of all controls playback & save and transfer commands too.